Total :
0,0€
Custom frame protection for FORBIDDEN – Sublimistick Integral
99,9€
10% discount on the Sublimistick Integral Frame + pack Forks!
Description
A real second skin for your bike, our frame protection for Forbidden – Sublimistick Integral will ensure your bike’s longevity and radiance.
Our integral frame protectors are available for Forbidden mountain bikes!
We manufacture customized kits that fit your bike perfectly, down to the millimeter. All patches cover up to 90% of the frame surface. Our kits are specially designed to protect against impacts from stones and other elements that can damage your frame. Our patches are spaced 3 to 5mm apart.
The advantages of the Integral kit :
- protects from scratches caused by use (projections, shuttles, bike racks, chairlifts, etc.).
- protects against minor stone impacts.
- keeps the frame looking perfect all year round.
- a scratch-free bike sells better.
The kit Integral includes :
- installation instructions & tips.
- 0.5ml Slicy Shampoo solution for easy application.
- a degreasing wipe to clean the frame before installation.
As an option, we offer our installation kit PRO including :
- a bottle of Slicy spray
- Slicy microfiber
- top-of-the-range PPF raclette
- Slicy shampoo
- a dosing pipette
- a degreasing wipe
This durable kit is designed to give you long-lasting service. It is suitable for optimal application of protective films.
Features of our Slicy protective film :
- high-end polyurethane film.
- thickness: 160 microns.
- Anti-uv treatment.
- non-yellowing.
- self-healing properties.
- non-stick (mud sticks less easily).
ATTENTION Some frames with rough or grainy (anodized) paint cannot be protected with an optimal, streak-free finish! Frames with smooth, glossy or matte paint will give ideal results.
Additional information
Additional information
| Weight | 0,37 kg |
|---|---|
| Models | DREADNOUGHT, DREADNOUGHT V2, DRUID CoreE / LitE, DRUID V2, SUPERNOUGHT |
| Year of bike release | 2017, 2018, 2019, 2020, 2021, 2022, 2018 – 2021, 2020 – 2021, 2019 – 2020, 2019 – 2021, 2023, 2024, 2025 |
| Sizes | S, S/M, M, M/L, L, XL, XXL, S1, S2, S3, S4, S5, S6, L/XL, R3, 16", 18" |
| Finish | Glossy, Mat |
Installation
Installation
Installing a Sublimistick Integral protection kit requires patience and dexterity, but nothing too daunting. For the less adventurous, we invite you to contact your nearest Slicy dealer so that he can install your kit for you. Find our dealers HERE
Preparation:
– Place the kit in a clean indoor room at room temperature (between 17°C and 27°C).
– Clean and degrease the bike thoroughly with a suitable solution (bike cleaner or degreaser).
– Remove as many of the bike’s components as possible to facilitate installation (wheels and external casings).
– Make sure the bike is dry and clean.
– Fill a Spray bottle with 0.5L of water and 0.5ml of Slicy Shampoo supplied in the kit.
– Wash hands thoroughly before fitting.
Installation:
– Identify the patches according to the instructions supplied.
– Apply the patches in order (starting with N°1).
– Moisten the area of the frame to be protected with Spray.
– Wet your fingers with Spray.
– Unpeel the patch in question.
– Wet the patch with the spray (sticky side).
– Apply the patch where indicated on the instructions.
– Adjust and reposition the patch until you find the right position. Patches can be peeled off and repositioned while still damp.
– Use the squeegee to remove water and air bubbles. Start from the center and push the water outwards.
– Use the microfiber to wipe off excess water from the outside of the patch.
– Wait a few minutes, then check that the patch is firmly stuck everywhere. You can use your fingers to press firmly on corners and edges.
– A stubborn angle? Be patient. Keep pressing on it with your fingers until it sticks. Heat the patch for a few seconds with a hair dryer, then press firmly.
– Repeat these operations with all the patches in the kit.
– The kits are designed with a spacing of 3 to 5 mm between each patch.
– Once the kit has been installed, leave your bike to warm up for 24 hours.
– Do not ride or wash your bike for 24 hours.
Remove the kit:
– Heat the patches with a hair dryer.
– Remove the patches by gently unrolling them.
Responsibility :
– Slicy accepts no responsibility for any damage to the bicycle frame caused by the installation/removal of the Sublimistick Integral kit.
– If you find that a patch doesn’t fit the shape of the tubes, contact the Slicy team at contact@slicy-products.com so that we can adjust our cutting file.
Ask for the right kit for your bike.
Ask for the right kit for your bike.
Can’t find the right kit for your bike? Don’t worry, we’ve got you covered!
Every week, our team works hard to add new references to our kit catalog. If we haven’t yet had a chance to create the right kit for your bike, we invite you to submit your request by filling in the form below.
As you’d expect, we won’t be able to develop every kit for every bike. We’ll be selecting those that can be used by as many riders as possible. New vintages will be favored, as well as sizes M and L.
To develop a kit, our team needs to have the bike in its hands. Fortunately, our local Slicy dealers give us access to these bikes so we can develop the templates. We can also welcome you in our workshop, accompanied by your bike, if you live near Annecy.
Delivery times Integral Kits
Delivery times Integral Kits
Custom kit orders are processed every morning.
Each kit is sent to production within a day of the order being placed.
Shipping is organized immediately or the following day.
Delivery times are 2 to 5 days for available references.
Certain references noted as “pre-order” can be delivered within 15 days.
